Skip to content
Serving Reseda and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (213) 401-2183

Furnace Repair in Reseda and Nearby San Fernando Valley Neighborhoods

Serving Reseda and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 401-2183

The short answer

If your furnace blows cold air, cycles on and off, makes new noises, or won't start, schedule a repair before the problem grows. We find the cause, explain your options, and give you a clear quote before any work starts. If the furnace is near the end of its life, we'll explain what replacement involves in the Los Angeles area.

Reseda winters are mild, so many furnaces sit idle for months and then get switched on during the first cold night of the season. That long rest is often when problems show up. A part may have worn out, dust may have built up on a sensor, or a filter may have been left in place since last year. Ventora HVAC Repair Service repairs gas furnaces for homeowners in Reseda and nearby areas, including Tarzana, Northridge, Encino, Van Nuys, Winnetka and Canoga Park. This page covers the signs that your furnace needs attention, what our technicians check, how to decide between repair and replacement, what affects the cost, and what happens during a visit.

Signs Your Furnace Needs Repair

Furnaces rarely fail without warning. Most show small symptoms first, and catching them early usually means a simpler repair. Because Valley homes may only need heat on cool mornings and evenings, these signs are easy to miss until a cold snap arrives.

If you smell gas, leave the house and call your gas utility or 911 from outside. Do not try to restart the furnace.

  • The blower runs but the air from the vents is cool or barely warm
  • The furnace turns on and off in short cycles without warming the house
  • The burners won't light, or they light and then shut off
  • Banging, squealing, rattling or grinding sounds that weren't there before
  • A burning smell that lasts more than the first few minutes of the season
  • Some rooms are much colder than others
  • The thermostat calls for heat but nothing happens
  • A yellow or flickering burner flame instead of a steady blue one
  • Your carbon monoxide alarm goes off

What We Check During a Furnace Repair Visit

We start with the symptom you describe and then work through the system in order. Many no-heat calls come down to one failed part, but we check the related components too. A furnace that is short-cycling, for example, may have a dirty flame sensor and also a clogged filter that is making it overheat.

Safety is part of every repair visit. If we find a cracked heat exchanger, a venting problem or a gas leak, we'll show you what we found and explain why the furnace should not run until it is fixed.

  • Thermostat settings, wiring and power to the furnace
  • Air filter condition and airflow through the return and supply
  • Igniter, flame sensor and burner operation
  • Gas valve and gas pressure
  • Inducer motor, blower motor and capacitor
  • Limit switches, pressure switches and the control board
  • Heat exchanger condition, as far as it can be seen
  • Flue and venting, including draft and connections
  • Condensate drain on high-efficiency furnaces

Repair or Replace: How to Decide

Most furnace problems can be repaired. Igniters, flame sensors, capacitors, switches and blower motors are common parts, and replacing one can return a sound furnace to normal use. When the rest of the system is in good shape, repair is usually the practical choice.

Replacement makes more sense when the furnace is old, has needed several repairs in a short time, has a cracked heat exchanger, or no longer heats the house evenly. We'll tell you plainly which situation you're in and leave the decision to you.

If you are thinking about replacing the furnace, check the rules first. South Coast AQMD Rule 1111 limits NOx emissions from gas furnaces sold and installed in the Los Angeles region, and the district has been amending it toward zero-emission requirements. The district sets and revises the compliance dates, so check the current version of the rule before you choose new equipment.

Some homeowners use a replacement as the time to switch to a heat pump, which heats and cools. LADWP residential customers can apply for rebates on qualifying heat pump systems, with the amount based on the unit's efficiency rating. The application is filed after the system is purchased and installed, within 12 months of purchase. Many homes outside the City of Los Angeles are served by Southern California Edison instead, so available rebates depend on your utility, and we confirm the current offer before quoting it. The federal 25C tax credit for heat pumps applied to systems placed in service before December 31, 2025, and it is not available for new installations.

What Affects the Cost of Furnace Repair

We can't give an accurate price until we've seen the furnace and found the cause. Several factors affect the cost, and we'll go through them with you before any work begins.

  • Which part has failed and whether it is a common or specialty part
  • Furnace brand, model and age, which affect part availability
  • Where the furnace is installed, such as an attic, closet, garage or crawlspace
  • How long the diagnosis and repair take
  • Whether related problems turn up, such as a dirty burner or a blocked vent
  • Whether the visit is during regular hours or after hours

How a Furnace Repair Visit Works

When you contact us, we'll ask what the furnace is doing, roughly how old it is and where it is located. That helps the technician bring the right tools and common parts.

On site, the technician listens to your description, inspects and tests the system, and finds the cause. Before doing any work, they explain the problem, show you the faulty part when possible, and give you the repair options with a clear quote. Nothing is done without your approval.

Once you approve, we make the repair, run the furnace through a full heating cycle, and check that it lights, heats and shuts off as it should. We'll also mention anything we noticed that may need attention later, such as a filter that needs changing or a part showing wear, so you can plan ahead.

Furnace Repair by city

What to expect

How a visit goes

  1. Find the cause first

    We test the system and track down what is actually wrong before suggesting parts or replacements, so you know what you are paying to fix.

  2. Explain your options

    We tell you what we found, what each option involves, and when a repair is reasonable versus when replacement deserves a closer look. The decision is yours.

  3. Check local rules and rebates

    Furnace rules and utility rebates in the Los Angeles area change and depend on your address. We confirm what currently applies to your home before we bring it up.

FAQ

Common questions

Why does my furnace smell like it's burning when I first turn it on?

Dust settles on the burners and heat exchanger during the months the furnace is off. A light burning smell for the first few minutes of the season is normal. If it lasts longer, smells like plastic or electrical wiring, or comes back each time the furnace runs, turn it off and schedule a repair.

Can I fix a furnace that won't turn on myself?

You can check the simple things first. Make sure the thermostat is set to heat and has working batteries, the furnace switch is on, the breaker hasn't tripped, the furnace door is closed tightly, and the filter isn't clogged. Leave anything involving gas, burners or electrical components to a technician.

How often should a furnace be serviced in a mild climate like Reseda?

Once a year is a good rule, ideally in the fall before you need heat. Even with light use, dust, worn igniters and dirty flame sensors can cause problems when the furnace starts up after months of sitting idle.

Is a cracked heat exchanger dangerous?

It can be. A crack can let combustion gases, including carbon monoxide, mix with the air circulating through your home. If we find one, we'll show it to you and recommend that the furnace not be used until it is repaired or replaced.

Do you serve areas outside Reseda?

Yes. We work with homeowners in Reseda and nearby San Fernando Valley neighborhoods, including Tarzana, Northridge, Encino, Van Nuys, Winnetka and Canoga Park. Contact us with your address to confirm service.

Should I replace my gas furnace with a heat pump?

It depends on your home, your current ductwork and your goals. A heat pump provides both heating and cooling, and rebates may be available depending on whether LADWP or Southern California Edison serves your address. We confirm the current offer before quoting it.

Tell Us What Your System Is Doing

Whether your AC is blowing warm air, your furnace won't start, or you are thinking about a heat pump, reach out to Ventora HVAC Repair Service. We will diagnose the problem and walk you through your options.

Call (213) 401-2183 Request Service